[Fot] over heating tr 3

[Marcel Van Mulders]

Is it possible that the maximum total advance is not right? I would check
the timing mark for correct location on the pulley when no other obvious
cause of overheating (air lock...) can be found.
Marcel.
-----Oorspronkelijk bericht-----
Van: Fot [mailto:fot-bounces at autox.team.net] Namens KENMUN at aol.com
Verzonden: maandag 2 juni 2014 21:10
Aan: fot at autox.team.net
Onderwerp: [Fot] over heating tr 3

just returned from another race weekend with the tr3 overheating. in a 20
min on track session the car gets hotter and hotter ending around 240  deg
f. with about 1/2 gal of coolant blown out. i'm running a thick  core, no
crank hole rad. and an oil cooler. i try to shroud the rad.  as tight as
possible. is there an ultimate cure for this problem? thanks, ken  m.
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be