[Fot] TR4 Valve Guide Clearance

[Tony Drews]

Done that...  :)

Tony

At 03:46 PM 6/28/2014, Jim Gray wrote:
>The guide clearances at racing temps, for bronze guides is .0035 -004 or plan
>on sticking a valve. Been there......
>Jim g
>
>Sent from my iPhone
>
>On Jun 24, 2014, at 12:01 PM, "Marcel Van Mulders"
><van.mulders.marcel at telenet.be> wrote:
>
> > In the Triumph Service Instruction Manual, 0.001" to 0.003" is recommended.
> > Maybe steel valve guides will cause no problems,but I believe bronze guides
> > should be reamed to the original size  after fitment
> > Marcel
> > -----Oorspronkelijk bericht-----
> > Van: Fot [mailto:fot-bounces at autox.team.net] Namens Michael Moore
> > Verzonden: donderdag 19 juni 2014 14:21
> > Aan: FOT
> > Onderwerp: [Fot] TR4 Valve Guide Clearance
> >
> > Is there a recommended clearance for valve guides? I may have a valve
> > sticking.
> >
> > Engine builder just put in oversized valves and new guides.
> >
> >
> > Thanks
> > Mike
> >
> > 62 TR4, Race car
> > 63 TR4, Street car
> >
> > Mike & Becky Moore
> > 6050 Ruhl Road
> > Fairview, PA 16415
> >
> > [demime 1.01d removed an attachment of type image/gif which had a name of
> > image001.gif] _______________________________________________
> > fot at autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
> > http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be
> > _______________________________________________
> > fot at autox.team.net
> >
> > http://www.fot-racing.com
> >
> > Donate: http://www.team.net/donate.html
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com