[Fot] Gt6 crank main diameter?

[SCOTT JANZEN]

Thanks!

Sent from my mobile device

> On Jul 29, 2014, at 6:39 PM, Michael Porter <mdporter at dfn.com> wrote:
>
>> On 7/29/2014 3:45 PM, SCOTT JANZEN wrote:
>> My manual clearly has it wrong (2.01"). I'm measuring 2.3". Does anyone
have
>> the factory specs for the diameter of the crank mains?
>
> This is, I think, an error in the factory manual that's been carried over to
most other manuals. I'm betting that this was correct for the Mk 1s with the
1600 cc engine, and that figure was just carried through.
>
> The correct specs are the same as for the TR6 mains: 2.3110"-2.3115" for
std. dia., with acceptable clearance of 0.0010"-0.0027", with the optimum
clearance around 0.0018"-0.0020".
>
>
> Cheers.
>
> --
>
>
> Michael Porter
> Roswell, NM
>
>
> Never let anyone drive you crazy when you know it's within walking
distance....