[Fot] rear main cap seals

[Jeff Kelley]

The factory soaked the wool felt seals in shellac before they were 
driven into place. Use only a small piece at a time and don't try to set 
the whole seal in one shot.

J Kelley


On Tue, Jul 8, 2014 at 11:35 AM, riverside at southslope.net wrote:

> I am putting together a motor and have been advised that it is
> advantageous to replace the bcut up ropeb   (still canbt get the
> image of an elderly lady putting on panty hose out of my
> mind)  with  squeezed in silicone sealant.   Might a void form unknown
> to the installer?   If the rope is still best,   what is the best 
> gunkum
> with which to soak it.
>
> Thanks for the access to your experience.
>
> art de armond
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/jeffreykelley@charter.net