[Fot] TR4 axle shafts
rkramer3 at austin.rr.com
rkramer3 at austin.rr.com
Tue Jan 21 16:38:29 MST 2014
I wonder if Southwick can machine axles with a threaded outer shaft to hold a stock washer and castellated nut?
---- MadMarx <tr4racing at googlemail.com> wrote:
> Anybody knows the diameter of the Southwick axle?
> I managed to do a successful calculation with a spline design and the stock
> diameter of 33.02mm (I used 33mm = 1.299").
> The steel needs to be quite good with a surface hardening of 0.11" depth.
>
> As Steel I would like to use X19NiCrMo4 if this is available at reasonable
> cost.
> Any suggestions?
>
> Chris
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/rkramer3@austin.rr.com
More information about the Fot
mailing list