[Fot] Goodparts heavy duty half shafts and axles for sale

[Chuck Arnold and/or Kathleen Kelley]

I am selling a pair of Goodparts heavy duty half shafts and axles [see
attached link for pictures of what I am selling and of the whole Good parts
kit]. I switched to his CV joints which is why I have these little used
parts to sell.


I am not selling my pair of his hubs.  To use the parts I am selling, you
will also the hubs from Richard.   A pair of heavy duty axles and hus
retails for $1598 from Good Parts.  The hubs alone are $225 each/450 pair.
I am asking $700 for the parts I have, meaning you could have a complete
setup for $1150.



In the pictures I have three female [inner] half shafts shown and also an
adapter.  The axles were originally purchased to mate with a 6-bolt
Infinity differential [from Richard's kit].  The adapters shown let you
connect to the dif with the four bolt TR parts.  The "loose" half shaft
came from Richard and is longer than the installed one because I switched
out the Infinity diff for a stock one and needed to use the half shaft I
alread had. I am including the adapters and the three inner half shafts in
my sale offer.


I also have a six bolt 3.54:1 Infinitydiff for sale if you are contenlating
going to Richards kit and want that ratio.  I put in a racing prepped
J-type OD and do not need that low ratio now.  I will sell it for $200.


I am offering these to FOT and 6-PAck before going to e-Bay.

Here is the link, hope it works:

https://plus.google.com/photos/103241823961257430252/albums/5971790523189987361
-- 
Chuck Arnold and Kathleen Kelley