[Fot] Steel Connecting Rods for a TR6

[Bob Bownes -Seiri]

Can do them and willing to do them are two different things...

> On Feb 27, 2014, at 11:54, Larry Young <cartravel at pobox.com> wrote:
>
> A while back, I attended a talk by the owner of Skat.  He said for their
cranks and rods they did all of their machine work in the US, but their raw
forgings were done offshore.  He made the statement that their forgings were
not done in the US, because there were no longer any companies that could do
them. That seems hard to believe. -Larry
>
>
>> On 2/25/2014 10:52 AM, MadMarx wrote:
>> China
>>
>> -----Urspr|ngliche Nachricht-----
>> Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
>> Auftrag von Chuck Arnold and/or Kathleen Kelley
>> Gesendet: Dienstag, 25. Februar 2014 17:48
>> An: Irv Korey
>> Cc: FOT
>> Betreff: Re: [Fot] Steel Connecting Rods for a TR6
>>
>> Both Charly Mitchell and myself are using these in at least one of our
race
>> engines.  I have them in the current engine and all seems fine.  Have
>> Pauters in the one I am having rebuilt at the moment.  The ones referenced
>> here do have a minor issue in the 6 and that is they drag just a little on
>> the bottom of the cylinder skirts.  Had to relieve each side a little bit.
>>
>> They were procured out of England, but I do not know if they are
>> manufactured there.
>>
>>
>>> On Tue, Feb 25, 2014 at 7:09 AM, Irv Korey <emanteno at comcast.net> wrote:
>>>
>>> Good morning, All.
>>>
>>> There is a discussion currently on the 6-Pack Forum about steel
>>> connecting rods for a TR6. Specifically, these steel connecting rods:
>>>
>>>
>>> http://www.ebay.com/itm/181137531371?ssPageName=STRK:MEWAX:IT&_trksid=
>>> p3984.m1423.l2649
>>>
>>> The potential buyer is considering these for his street engine because
>>> they are much less expensive than new stock rods. They should also be
>>> stronger and lighter, but I doubt this car will driven hard enough to
>>> notice. Is anyone familiar with this manufacturer? Any experience? I'm
>>> familiar with Carrillo and Pauter, but I'm not familiar with this
>>> company. Any other suggestions/ advice?
>>>
>>> Thanks,
>>>
>>> Irv Korey
>>> _______________________________________________
>>> fot at autox.team.net
>>>
>>> http://www.fot-racing.com
>>>
>>> Donate: http://www.team.net/donate.html
>>> Archive: http://www.team.net/archive
>>> Forums: http://www.team.net/forums
>>> Unsubscribe/Manage:
>>> http://autox.team.net/mailman/options/fot/triosan@gmail.com
>>
>> --
>> Chuck Arnold and Kathleen Kelley
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/fot/tr4racing@googlemail.com
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/cartravel@pobox.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/bownes@web9.com