[Fot] Distributors

[steve]

On my TR3, setup by my dad,

There is a thin "gasket" which is actually a spacer cut from a beer-can that goes between the engine block and the distributor pedestal. This adds just a little play between the drive gear on the cam and the distributor drive gear.

~Steve



-----Original Message-----
>From: Mark J Bradakis <mark at bradakis.com>
>Sent: Feb 23, 2014 1:01 AM
>To: fot at autox.team.net
>Subject: Re: [Fot] Distributors
>
>Does the drive gear in the block have the proper end float?
>
>mjb.
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/colordog.1@earthlink.net