[Fot] TR3 Wheel Studs

[John Styduhar]

I used Summit Part number SUM-910101 wheel studs for my stock TR3 front
hubs, which are 2.5 inches long, 12mmx1.5 RH, and have a knurl diameter of
.509 inches.  They were a nice press fit in the hub providing the holes
aren't worn. Uses SUM-7540021 lug nuts, open end, conical seat 60 degrees,
and use a 13/16 socket.   Same setup on the rear.


On Tue, Feb 4, 2014 at 5:20 PM, Todd Redmond <alfetta95 at optonline.net>wrote:

> Friends,
>
>
> I need to order wheel studs for the front of my TR3 using stock hubs.
> I'm looking for a longer length to match my rear studs. B I have the
> Southwick axle. B What is the diameter of the knurled part on a stock
> stud? B Or What is the diameter of the stud hole on the stock hub?
>
>
> Man, that got confusing!
>
>
> Todd Redmond
> 1958 Triumph TR3aB _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/fot/johnstydo at gmail.com