[Fot] TR4 lifter source
Brian
britracer89 at yahoo.com
Wed Dec 31 15:22:43 MST 2014
I have BP Northwest tappets in my GT6 with the same cam for about 5 race
seasons. They are the HD set I believe is how they were advertised at the
time. Not sure about the radiused edge. The cam is a race cam from Cambridge
Motorsport. All other parts I have purchased from BPNW have been good
quality.
Brian
Foster, RI
-----Original Message-----
From: "toodamnfunky at comcast.net" <toodamnfunky at comcast.net>
Sent: b12/b31/b2014 11:33 AM
To: "fot" <fot at autox.team.net>
Subject: [Fot] TR4 lifter source
I'm beginning an engine rebuild and Ken G is out of " good" lifters. BPNW has
lifters and claim they test every batch. This from their website.
Any feedback on lifters would be appreciated.
Jim g
B
These are Heavy Duty Tappets (lifter) for a Triumph TR3, Triumph TR4, Triumph
TR4A. They are lightened and have an extra oil drilled in the side for extra
lubrication. Every batch of tappets are tested when they arrive from the UK.
Each tappet will have a minimum hardness of Rockwell 54. The industry
standard
is 50 for tappets. We have never had a bad batch of tappets like other
companies and never will because of our dedication to dealing with only
quality suppliers.
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/britracer89@yahoo.com
More information about the Fot
mailing list