[Fot] TR4 lifter source

[Tony and Annie Garmey]

Greg Solow has the only lifter to use .



> On Dec 31, 2014, at 8:48 AM, Tony Drews <tony at tonydrews.com> wrote:
>
> We tested some from BPNW years ago and they were fine as far as hardness.  I
run their lifters.  However I can't buy their "performance" onces because
someone has decided to grind a bevel around the outside edge, reducing the
diameter running against the cam.  If you run a cam that doesn't require full
diameter those are OK too, though.
>
> Tony Drews
>
> At 10:24 AM 12/31/2014, toodamnfunky at comcast.net wrote:
>> I'm beginning an engine rebuild and Ken G is out of " good" lifters. BPNW
has
>> lifters and claim they test every batch. This from their website.
>> Any feedback on lifters would be appreciated.
>> Jim g
>> B
>>
>> These are Heavy Duty Tappets (lifter) for a Triumph TR3, Triumph TR4,
Triumph
>> TR4A. They are lightened and have an extra oil drilled in the side for
extra
>> lubrication. Every batch of tappets are tested when they arrive from the
UK.
>> Each tappet will have a minimum hardness of Rockwell 54. The industry
standard
>> is 50 for tappets. We have never had a bad batch of tappets like other
>> companies and never will because of our dedication to dealing with only
>> quality suppliers.
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/horizonracing@msn.com