[Fot] Aluminum connectors

[MadMarx]

The connectors look like new.
I inspect them when I put the engine back together, I just wanted to make
sure in advance that I didn't do anything wrong with them or if anything is
missing.

Thanks
Chris

-----Urspr|ngliche Nachricht-----
Von: Tony Drews [mailto:tony at tonydrews.com]
Gesendet: Mittwoch, 31. Dezember 2014 15:17
An: MadMarx; fot at autox.team.net
Betreff: Re: [Fot] Aluminum connectors

No seal needed on the taper / AN joint.  Normally are good sealing nicely
reusable fittings.  But they are aluminum and if the sealing surface gets
damaged would need to be replaced.

Cheers, Tony Drews

At 05:44 AM 12/31/2014, MadMarx wrote:
>Hi @ all,
>
>hope you are getting well to the next year.
>
>My car has many oil lines and also a lot of aluminum connectors and
>some of the them do leak.
>Is there any trick to seal them?
>I think that I have tighten them enough and hesitate to tighten more
>not to destroy them.
>
>Is there a seal missing in those connectors?
>
>http://ecx.images-amazon.com/images/I/41P918-F13L.jpg
>
>Just an example what I mean for the system.
>
>Cheers
>Chris
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com