[Fot] TR head cracks

[Tony Drews]

I received a picture of the head - the crack is to the point where if 
it grows any further there will be definite sealing issues on #2 and 
probably #3.  I like this suggestion - a hole to stop the propagation 
and silver solder to seal it back up.  I'll have to remember that one!

When I went through the "cracked head" issue (mine wasn't 
repairable), someone suggested "stitching" which is a series of 
threaded plugs run through the crack.  That's the only other fix that 
comes to mind.

Cheers, Tony Drews

At 05:53 AM 12/24/2014, MadMarx wrote:
>You can stop the crack with a hole at its end and solder the crack with
>silver solder.
>Seems to work fine with a good success rate.
>
>Cheers
>Chris
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com