[Fot] TR6 crank journal dimensions

Scott Janzen sjanzen at me.com
Mon Dec 15 09:21:46 MST 2014


Charly's numbers are correct - I'm in the middle of a GT6 build - same
dimensions, and that's where they should be before grinding undersize.

On Dec 15, 2014, at 11:09 AM, Charly Mitchel wrote:

According to my manual,
Main journal diameter 2.311-2.3115"
Crankpin diameter 1.875-1.8755"
Charly Mitchel
TR6 #44
----- Original Message ----- From: "marty" <trmarty at hotmail.com>
To: "FOT" <fot at autox.team.net>
Sent: Monday, December 15, 2014 7:56 AM
Subject: [Fot] TR6 crank journal dimensions


> Anybody have the dimensions handy for the TR6 crankshaft main and rod
> journals? I don't seem have them at work. I found some on the internet but
> think they left off a number.
>
>
>
> Thanks,
>
>
>
> Marty
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/charly@mitchelplumbing.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen@me.com



More information about the Fot mailing list