[Fot] . Head intake / exhaust port question

[Tony Drews]

EGT's are in the 1300 to 1400 degree range 6" from the head.  Will be 
higher in the head itself.

Tony Drews

At 01:18 PM 12/19/2014, Dan wrote:
>Folks,
>I have posted to a couple of TR related sites and have received conflicting
>info to this inquiry:
>
>In one of Kas Kastner's recent books he shows a couple of cross sections thru
>the intake and exhaust ports.  On the exhaust he shows a weld build up
>location behind the valve guide that then gets ground down to smooth the
>transition of the outgoing gas.  Wondering if anyone has tried to use MOROSO A
>+ B Epoxy in place of the weld and if so what has been the result?  TR Driver
>in a reply indicated that as long as the exhaust gas didn't exceed 250 degrees
>it should work.  So next question is what is the normal exhaust gas temp on
>might see in the pocket just below the exhaust valve?
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com