[Fot] Aluminum connectors

[Tony Drews]

No seal needed on the taper / AN joint.  Normally are good sealing 
nicely reusable fittings.  But they are aluminum and if the sealing 
surface gets damaged would need to be replaced.

Cheers, Tony Drews

At 05:44 AM 12/31/2014, MadMarx wrote:
>Hi @ all,
>
>hope you are getting well to the next year.
>
>My car has many oil lines and also a lot of aluminum connectors and some of
>the them do leak.
>Is there any trick to seal them?
>I think that I have tighten them enough and hesitate to tighten more not to
>destroy them.
>
>Is there a seal missing in those connectors?
>
>http://ecx.images-amazon.com/images/I/41P918-F13L.jpg
>
>Just an example what I mean for the system.
>
>Cheers
>Chris
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com