[Fot] Carb spacers & velocity stack lengths

[Vangoughv]

Well I'm looking forward to it!
I'm learning a lot from you old farts :)
LOL

Vince

> On Aug 28, 2014, at 4:21 PM, "Barr, Scott" <sbarr at McCarty-Law.com> wrote:
>
> Uh-oh.  Here comes the "transmissions" discussion again  :-)
>
> Scott B.
>
> -----Original Message-----
> From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of malaboge at aol.com
> Sent: Thursday, August 28, 2014 3:12 PM
> To: fot at autox.team.net
> Subject: Re: [Fot] Carb spacers & velocity stack lengths
>
> snip
> One could say I've done a little work on my manifold.
> Specifically welded the snott out of it and created the proper taper to the
> runners.
> snip
>
> I too did a bit of "adding material" to an intake and got put on the
trailer
> at an event back in the day! Luckily I brought another unmodified intake as
I
> knew this was going to be a "verbal" confrontation at least.
>
> What clubs are allowing this sort of mods?  Around here (Nor Cal) the clubs
> adhere to the old SCCA rules...
> isn't that sort of the definition
> of vintage?
>
> Nick in Nor Cal
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/sbarr@mccarty-law.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/vangoughv@hotmail.com