[Fot] Caliper Rebuild

[robertten1 at aol.com]

Amici,


I have several of the square o-rings use in the calipers cross over
port.  I could send a couple if you send a pre stamped envelope to me.
Contact off line,
Bob T
"64 SpitGT  autocrosser



-----Original Message-----
From: Randall <TR3driver at ca.rr.com>
To: fot <fot at autox.team.net>
Sent: Wed,
Aug 27, 2014 12:02 pm
Subject: Re: [Fot] Caliper Rebuild


> The torques have
to be in the archives somewhere, because 
> this topic has come up at least a
couple of times before, 
> albeit quite a 
> while ago.  

I've got two posts
saved in my personal archives.  Both agree on 45 ft-lb for 
the 5/16" and 75
ft-lb for the 3/8".  One post from
Brian Schlorff at Power British; the other
originally posted by Cliff Hansen 
(reposted by John Lye) and crediting TRF
tech support
for the info.

TRF also offers the O-rings, which as I recall are
slightly rectangular in cross 
section rather than square.

Randall
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/robertten1@aol.com