[Fot] Modern internals in Smith gauges

[Michael Moore]

I had my tach converted to electronic by Morris Mince at West Valley
Instruments, did a really nice job, and even updated and checked it for free
last month.

I also went one step further, on his suggestion, and had face re-silkscreened
to go to 8k (and redline mark is now at 6k-7k). Looks exactly like original
gauge unless you study it closely. I run at 5500 rpm but it nice to not have
needle always close to high end of tach.

Thanks
Mike

Michael T. Moore, CPA
2007 West 32nd Street
Erie, PA 16508

Phone: 814-868-4831  ext 103
Fax:        814-864-7383

-----Original Message-----
From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Duncan Charlton
Sent: Thursday, August 14, 2014 7:48 PM
To: fot at autox.team.net
Subject: Re: [Fot] Modern internals in Smith gauges

You might also check with Nisonger in NY.  They repaired a damaged tach for me
that had already been modified by a previous owner.

Duncan

On 8/14/14, 2:51 PM, toodamnfunky at comcast.net wrote:
> Does anyone know of a source to get modern internals in a Smiths tach.
> I'm trying to get all my instruments back to original in appearance.B
> jim gB _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/duncan.charlton54@gmail.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mmoore@mtmcpafirm.com