[Fot] TR6 cast piston clearance

[Steve Yott]

I use .002" for all TR6 cast pistons...

Steve Yott

-----Original Message-----
From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Greg & Alison
Blake
Sent: Wednesday, August 06, 2014 6:12 PM
To: 'FoT Triumph'
Subject: [Fot] TR6 cast piston clearance

I am building a motor for an endurance race TR6 (Chump, WRL.)  I'd like to
know what the group recommends for piston to bore clearance for a County
brand +0.040" piston.  These are cast pistons.

 

Thanks in advance.

 

Greg
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/tr4@wi.rr.com