[Fot] Lets play twister

[Bill Tobin]

Hi, one book says tighten the stub axle nut to 181-239 ft lb.
Another book says the torque for the wheel bearing locknut is 210 ft lb.
I think we're talking about the same thing.
Hope this helps.
Bill
----- Original Message ----- 
From: <malaboge at aol.com>
To: <fot at autox.team.net>
Sent: Friday, April 25, 2014 6:50 PM
Subject: [Fot] Lets play twister


> No, not the game...need bolt torque!
>
> Are any of you secret Datsun owners?? I need the torque specs for the rear
> axle nut...not the lug nuts, but that big ole nut on the back of the outer
> axle on an early 240Z or 510.? I'd buy a book, but this is the only part 
> of a
> Datsun that I use.? Not that certain TR's are renowned for shedding wheels 
> at
> the worst possible time or anything...just sayin that an ounce of 
> prevention
> and all that...
>
> You picked a fine time to leave me loose wheel...
> Nick in Nor Cal
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net