[Fot] tr4-6 transmission oil capacity

[SCOTT JANZEN]

Thanks to all who responded. I had already drained the trans, realized that the fill plug I had previously installed with the transmission out of the car was not going to break loose with the tools on hand and in place, (the bracket holding the slave cylinder - gt6 install of a tr6 transmission- is in the way of a clean wrench grip), so I had to refill from the drain plug at the bottom, hence the need for quantity. A full, inverted Red Line  bottle with a hose inserted through a hole in the cap, duct tape to hold said hose in place, and a small hole in the bottom (top) of the bottle through which I bled in compressed air from a nozzle.  Felt like McGiver, and lost a little switching from the hose to the drain plug, but it worked!

Sent from my mobile device

> On Apr 7, 2014, at 8:55 PM, Scott Janzen <Janzen at REcatalyst.com> wrote:
> 
> how much oil does this tranny take?  (don't ask why I want to know)
> _______________________________________________
> fot at autox.team.net
> 
> http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/sjanzen@me.com