[Fot] Lifters

[John Hasty]

Couldn't down load pics; but we are using ones made at a NASCAR type shop in
Troy NC and after one season you can't see a mark on them

Sent from my iPhone

> On Apr 2, 2014, at 9:41 PM, Tony Drews <tony at tonydrews.com> wrote:
>
> There are two lengths of lifter in that picture - do you use both lengths or
are you comparing it to a stock length one just so we see the difference?  If
you are using two different lengths, what is the logic on where the shorter
one is installed?
>
> Cheers, Tony
>
> At 04:17 PM 4/2/2014, MadMarx wrote:
>> Hi,
>>
>> I now have these lifters for two year in use.
>>
https://lh5.googleusercontent.com/-moHnemvOoI0/UJfrIMoHBbI/AAAAAAAACDg/D0qVv
>> xgpRpA/w798-h809-no/DSC02992.JPG
>>
>> They are tiny but seem to last.
>> They have a very gentle crown of 0.02mm (0.000787") and my cam has no
taper.
>>
>> The cam has still all little grinding rills visible so that would mean no
>> wear after two years.
>>
>> Good stuff.
>>
>> Cheers
>> Chris
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/tony@tonydrews.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com