[Fot] Front Engine mounts

[john hasty]

Well, I must confess that when we put the present motor in it had a TR4
plate that didn't quite fit the TR3; so the use of bolts was a necessity,
not actually a choice! 


John H. Hasty
Attorney At Law
Guthrie, Davis, Henderson & Staton, P.L.L.C.
719 East Boulevard
Charlotte, North Carolina 28203-5113
Tele: (704) 372-5600
Fax: (704) 372-4601
E-mail: jhhasty at gdhs.com
www.gdhs.com
 
PRIVILEGE AND CONFIDENTIALITY NOTICE:  This message (and any attachments) is
intended only for the use of the addressee and may contain information that
is PRIVILEGED and CONFIDENTIAL, and/or may contain ATTORNEY WORK PRODUCT.
If you are not the intended recipient, you are hereby notified that any
dissemination of this communication is strictly prohibited.  If you have
received this communication in error, please erase all copies of the message
and its attachments and notify us immediately.  Thank you.
 
IRS CIRCULAR 230 NOTICE:  In order to comply with certain IRS regulations
regarding tax advice, we inform you that, unless expressly stated otherwise,
any tax advice contained in this communication (including any attachments)
is not intended or written to be used, and cannot be used, for purposes of
(i) avoiding penalties under the Internal Revenue Code or (ii) promoting,
marketing or recommending to another party any transaction or matter
addressed herein.
-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Yellow04
Sent: Tuesday, September 03, 2013 10:06 PM
To: fot at autox.team.net
Subject: Re: [Fot] Front Engine mounts

My TR4 had solid front engine mounts when I bought the car. I never figured
out any benefit of them, and they transferred enormous amounts of vibration
into the frame.

 I am not sure if one of Joe's torque reaction arms work on a TR3, but it's
the cat's meow on a TR4.

Sent from my Verizon Wireless smartphone

John Hasty <jhhasty at gdhs.com> wrote:

>Bolts.....
>
>Sent from my iPhone
>
>On Sep 3, 2013, at 8:25 PM, Todd Redmond <alfetta95 at optonline.net> wrote:
>
>> FoT,
>>
>>
>> What are we using for front engine mounts for a racing TR 3? B I have 
>> one of ARE's new rear mounts. B Are the stock mounts up to the task? 
>> B Does anyone sell an uprated one? B Has anyone tried using a solid 
>> mount?B
>>
>> Any info is appreciated.
>>
>>
>> Thanks
>> Todd Redmond
>> _______________________________________________
>> fot at autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/yellow04@tr4racer.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com