[Fot] Exhaust Header
Van Mulders Marcel
van.mulders.marcel at telenet.be
Wed Oct 30 13:38:26 MDT 2013
Kas,
Yes, big news, my Stuska engine dynamometer (of Powertest inc.) will be
running in a month or so. The purpose built cell is about ready.
The hardware : all the Stuska parts and most of the additional plumbing,
cooling, electricity ... are in place. I've also the 4cyl and 6 cyl TR
engines rear plate and cankshaft adaptors. But there are still a myriade of
smaller things to do. I've surely underestimated the work that is involved.
The dyno can run manually or automatically to instructed programs and the
recorded data can be sent by email : be sure you will get results, inclusive
a lot of questions!
Marcel.
_____
Van: Kas Kastner [mailto:kaskastner at gmail.com]
Verzonden: woensdag 30 oktober 2013 20:11
Aan: Van Mulders Marcel
Onderwerp: Re: [Fot] Exhaust Header
So you will have your dynamometer running soon?
Never be beaten by equipment.
On Wed, Oct 30, 2013 at 11:22 AM, Van Mulders Marcel
<van.mulders.marcel at telenet.be> wrote:
Steve, your headers are also a lot wider (diameter) than mine. Bigger is not
always better and many tend to fit too wide exhaust pipes, but maybe 38mm (1
1/2") is definitely too small on a race car, I'll found out before next
racing season.
-----Oorspronkelijk bericht-----
Van: steve [mailto:colordog.1 at earthlink.net]
Verzonden: woensdag 30 oktober 2013 16:34
Aan: Van Mulders Marcel
Onderwerp: Re: [Fot] Exhaust Header
I also have Stahl headers on my TR3 race car.
~Steve
-----Original Message-----
>From: Van Mulders Marcel <van.mulders.marcel at telenet.be>
>Sent: Oct 30, 2013 5:47 AM
>To: 'Todd Redmond' <alfetta95 at optonline.net>
>Cc: fot at autox.team.net
>Subject: Re: [Fot] Exhaust Header
>
> I'm interested in an exhaust header for my TR3 race car because the
>tubes on my header are only 37.5mm or
>1 1/2" outer diameter and most 4cylinder TR race cars seem to run with
>42mm tubes. What do you think?
>Marcel Van Mulders
>
>-----Oorspronkelijk bericht-----
>Van: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net]
>Namens Todd Redmond
>Verzonden: dinsdag 29 oktober 2013 19:41
>Aan: FOT at autox.team.net FOT at autox.team.net
>Onderwerp: [Fot] Exhaust Header
>
>Friends
>
>
>Looking for a header for the TR3. What are you using and where did you
>get it?
>
>
>4 into 1 is preferred
>
>
>Thanks
>Todd
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/van.mulders.marcel@telenet.be
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/colordog.1@earthlink.net
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/kaskastner@gmail.com
More information about the Fot
mailing list