[Fot] Exhaust Header

[Joe Alexander]

We have a Stahl header....in kit form.

It looked like it had been sold and returned.

It took some fiddling to make it fit, but it looks great.



Sent from my iPad

> On Oct 29, 2013, at 3:03 PM, John Wagner <j.wags63 at yahoo.com> wrote:
>
> We use a Stahl on the TR3 that we have had since the early 90's . This year
we
> had it recoated (ceramic) Works, and looks great.
> My first choice. Matching
> the plate is a good idea.
>
> John Wagner
> Just the wrench
>
>
>
> On Tuesday, October
> 29, 2013 2:34 PM, Todd Redmond <alfetta95 at optonline.net> wrote:
>
> Just checked
> the Stahl website.
>
>
> They have a header listed for a TR4 under the road race
> section at
> $555.00.
> Am i correct in assuming that the TR3 and TR4 header is
> the same?B
>
>
> This is for a race motor with a high port head.
>
>
> BTW The
> website says that they are closing the business at the end of
> 2013.
>
>
> Todd
>> On Tue, Oct 29, 2013 at 02:56 PM, john hasty wrote:
>>
>> Stahl...be sure and
> have them send the engine plate first so you can
>> match
>> to your head.
> Their pattern is off quite a bit.  I also specified 16
>> ga
>> tubes.  They are
> really very nicely made and only a very slight
>> modification
>> of the frame
> was needed at the collector.   It will cost you the
>> better part
>> of
> $800.00...........
>>
>>
>> John H. Hasty
>> Attorney At Law
>> Guthrie, Davis,
> Henderson & Staton, P.L.L.C.
>> 719 East Boulevard
>> Charlotte, North Carolina
> 28203-5113
>> Tele: (704) 372-5600
>> Fax: (704) 372-4601
>> E-mail:
> jhhasty at gdhs.com
>> www.gdhs.com
>> PRIVILEGE AND CONFIDENTIALITY NOTICE:  This
> message (and any
>> attachments) is
>> intended only for the use of the
> addressee and may contain information
>> that
>> is PRIVILEGED and CONFIDENTIAL,
> and/or may contain ATTORNEY WORK
>> PRODUCT.
>> If you are not the intended
> recipient, you are hereby notified that
>> any
>> dissemination of this
> communication is strictly prohibited.  If you
>> have
>> received this
> communication in error, please erase all copies of the
>> message
>> and its
> attachments and notify us immediately.  Thank you.
>> IRS CIRCULAR 230
> NOTICE:  In order to comply with certain IRS
>> regulations
>> regarding tax
> advice, we inform you that, unless expressly stated
>> otherwise,
>> any tax
> advice contained in this communication (including any
>> attachments)
>> is not
> intended or written to be used, and cannot be used, for
>> purposes of
>> (i)
> avoiding penalties under the Internal Revenue Code or (ii)
>> promoting,
> marketing or recommending to another party any transaction or matter
> addressed herein.
>> -----Original Message-----
>> From:
> fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net]
>> On
>> Behalf
> Of Todd Redmond
>> Sent: Tuesday, October 29, 2013 2:41 PM
>> To:
> FOT at autox.team.net FOT at autox.team.net
>> Subject: [Fot] Exhaust Header
> Friends
>>
>>
>> Looking for a header for the TR3. What are you using and where
> did you
>> get
>> it?
>>
>>
>> 4 into 1 is preferred
>>
>>
>> Thanks
>> Todd
> _______________________________________________
>> fot at autox.team.net
> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
> _______________________________________________
> fot at autox.team.net
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive:
> http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/j.wags63@yahoo.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com