[Fot] TR3 rear shock linkage arm bushing

[Jerry Van Vlack]

Joe, I was the one who sent you that information and as it turns out that 
part's taper is too large for the shock arms. It's better suited for tie rod 
ends, I have 2 paper weights sitting on my desk.

JVV

-----Original Message----- 
From: Joe Alexander
Sent: Thursday, October 17, 2013 2:47 PM
To: Peter Caldwell
Cc: <fot at autox.team.net>
Subject: Re: [Fot] TR3 rear shock linkage arm bushing

I used heim joints on the TR4a solid axle Ambro.

There is a tapered link that fits the arm available.

Sent from my iPad

> On Oct 17, 2013, at 1:35 PM, Peter Caldwell <peter at nosimport.com> wrote:
>
> No he wont.......if you mean for the link.  Peter
>
> At 01:30 PM 10/17/2013, john hasty wrote:
>> The guy in Madison WI probably...gee can't remember his name....someone
will
>> I am sure.
>>
>>
>> John H. Hasty
>> Attorney At Law
>>
>> Who can supply a new racing-quality bushing for the TR3 rear lever  shock
>> arm?
>
> Peter Caldwell
> World Wide Auto Parts of Madison
> 2517 Seiferth Rd.
> Madison  WI  USA  53716-3302
> US WATS (800) 362-1025
> (608) 223-9400
> (608) 223-9403 fax
>
> www.worldwideimportautoparts.com
> www.nosimport.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/fot/jerryvv@roadrunner.com