[Fot] bushed bell crank

[Joe Alexander]

We have been planning to do these parts for about three years, since Tim
provided the drawing.

We would do both parts in stainless steel. Simple stuff with the right
equipment.

I suppose we should resurrect the project.

So many Triumphs, so little time.

Joe A.
Sent from my iPad

> On Nov 27, 2013, at 11:42 AM, "Tim Murphy" <timmurph at fastbytes.com> wrote:
>
> In our case the pin was also very worn and I had to replace that part also,
>
> Tim
>
> -----Original Message-----
> From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
> Behalf Of Dave Hogye
> Sent: Wednesday, November 27, 2013 10:07 AM
> To: Friends of Friends of Triumph
> Subject: [Fot] bushed bell crank
>
> Hello Mike and Mike,
> I made a bell crank with a shouldered bronze bushing from hardware store
> parts.  It works perfectly and I don't think I'll ever have to fiddle with
> it a gain, except maybe add a drop of oil every couple years or so.
> I might be able to make a couple up if you'd like.
> Here are some photos of the set up.
>
> Dave H.
>
> http://s1305.photobucket.com/upload?location=Subaru WRX STI/bell crank
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com
>
>
> [demime found a multipart/alternative section which it tried
> to parse but could not find any section which it could render. Please send
plain text.]
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com