[Fot] Gasket Seal

[gasket.works at gte.net]

Honda and yamaha use "hondabond" or "yammabond" for gear cases with metal to metal contact / no gasket.  They purchase this from "threebond" a Japanese company who developed this tennacious goo.   The particular product is 1194.  I.E. "Threebond 1194". Available on amazon or ebay.  Or just go to a honda or yamaha retailer.  Just get the "non-hardening" variety.  It dilutes with laquer thinner.  It's like smooth toothpaste.  This is an option for those that like to try different products.  The holy grail is yet to be discovered.
M

Sent via BlackBerry from T-Mobile

-----Original Message-----
From: Tony and Annie Garmey <horizonracing at msn.com>
Sender: fot-bounces at autox.team.net
Date: Tue, 26 Nov 2013 07:34:54 
To: Peter Vucinic<pvucinic at netspace.net.au>; 'Mike Moore'<mmoore at wave1.net>
Cc: FOT at autox.team.net<fot at autox.team.net>
Subject: Re: [Fot] Gasket Seal

Goes for any mating parts .....both surfaces need to be flat, clean and Dry.
Ultra-gray RTV works very well on the gearbox casings.

:)
Tony

> From: pvucinic at netspace.net.au
> To: mmoore at wave1.net
> Date: Tue, 26 Nov 2013 23:25:43 +1100
> CC: FOT at autox.team.net
> Subject: Re: [Fot] Gasket Seal
>
> Mike,
> If you use the gasket use Permatex formagasket Non-Hardening gasket sealer.
> Black colored, brush on stuff in a little bottle.
> Otherwise, delete the gasket and use permatex ultra grey. The best stuff.
>
> Cheers...
>
> "You can Make a Small Fortune From Motor Racing. As long as You Started
With
> A Lage Fortune!"
> Kind Regards
> Peter Vucinic
> TR-4
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
>
>
>
> -----Original Message-----
> From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
> Behalf Of Mike Moore
> Sent: Tuesday, 26 November 2013 10:26 PM
> To: fot at autox.team.net
> Subject: [Fot] Gasket Seal
>
> My transmission is leaking between main housing and tail housing
> (non-overdrive).
>
>
>
> I bought a new gasket, but what do you recommend coating it with to seal it
> up good.
>
>
>
> Thanks
>
> Mike
>
>
>
> Michael T. Moore, CPA
>
> 2007 West 32nd Street
>
> Erie, PA 16508
>
>
>
> Phone: 814-868-4831  ext 103
>
> Fax:        814-864-7383
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/pvucinic@netspace.net.au
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/horizonracing@msn.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gasket.works@gte.net