[Fot] Reproduction Steering Racks

[Greg And Alison Blake]

Can you post a photo to the Facebook page of your fix, or send me a private
email?

Thanks

Greg

> On Nov 11, 2013, at 1:47 PM, vandecarr at aol.com wrote:
>
> I had my quick ratio rack fail when I hit a semi moveable object at an
> autocross. I didn't hit that hard and I loss all steering.  I fabricated a
> steel retainer to hold the pinion adjusting nut in place.  Haven't had any
> trouble since then.  If anyone is using this rack in a track situation I'd
> recommend doing the same.
>
>
> Dean VanDeCarr
>
>
>
> -----Original Message-----
> From: TR4 Tony <tr4.tony at virgin.net>
> To: fot <fot at autox.team.net>
> Sent: Thu, Nov 7, 2013 8:00 am
> Subject: [Fot] Reproduction Steering Racks
>
>
> All
>
> I thought I'd give you all a heads up on my position with reproduction TR4
> steering racks made in Argentina and supplied by MOSS or via others.
>
> I have had another near lethal failure this weekend on the Rally of the
> Tests,
> costing me a high placing and a class win as well as the car or worse.
People
> could have been hurt very badly. This is the second time.
>
> The issues are threefold in my experience, the first two are serious safety
> matters hence my email to this group.
>
> 1. The main steel rack tube is pressed without any notching or machined
> scoring into the alloy pinion housing, meaning that on left hand lock the
> rack
> tube parts from the housing and control is lost. This is because the rack
has
> nothing to bear against and therefore the wheels end up pointing in
opposite
> directions. The alloy housing appears to be made from a material of
> insufficiently high quality in my opinion and the press fit is poor.
>
> I am aware of 7 failures now, 6 on competition cars, one of which was mine
> and
> which I was lucky to walk away from.
>
> 2. The nut and spring on the top of the pinion housing (which allows the
rack
> preload / play to be adjusted) unwinds and falls off, causing loss of
control
> and excessive play in the rack, as well as ingress of material as it's open
> to
> the atmosphere. This is another potentially lethal failure mode and caused
> because the peening of the pinion housing / nut fails and the nut just
spins
> itself off. Again my opinion is that this is due to poor material, design
and
> manufacturing.
>
> I am aware if two such failures now, one on my car again which we were
lucky
> to survive unscathed.
>
> The cast alloy pinion housings also appear to be poorly cast, with blow
holes
> evident in the assembly indicating poor material, process and quality
> control.
>
> 3. There is a third problem in that the threads on ends of the rack are not
> cut properly, so track rod ends will not fit. Theses need to recut and
again
> is evidence of poor manufacturing and dimensional control.
>
> I am working with TR Enterprises in the UK to develop a short term fix
(which
> we have done) and ultimately have some racks made that are fit for purpose,
> however meantime my opinion is that anyone who has one of these 'Made in
> Argentina' steering racks should talk to their supplier and satisfy
> themselves
> of their safety in use.
>
> I for one will not be using such a rack in an unmodified form and will
> replace
> it as soon as is possible with a product that is designed to be safe in
use.
>
> Needless to say I wish to discuss this with MOSS and I am awaiting their
> response.
>
> Regards
>
> Tony
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/vandecarr@aol.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/ablake2@austin.rr.com