[Fot] TR4 clutch getting desperate, 2 days till racing school

[Peter Vucinic]

Mike,
Which side of the Metal bracket have you got the slave cylinder bolted to?
Sounds like you are about the thickness of the slave cylinder flange off
getting the right stroke?


Cheers


Kind Regards
Peter Vucinic
TR-4
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums



-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Mike Moore
Sent: Monday, 13 May 2013 10:25 AM
To: 'FOT'
Subject: [Fot] TR4 clutch getting desperate, 2 days till racing school

At track today, I had to push clutch in 95% of way to be able to shift. If I
go 100% pedal sticks to floor, but pulls up really easily.

 

Problem started after I replaced m/c and s/c. Master is Wilwood (same as was
in car) slave is stock from Roadster Factory.

 

Just took clutch out, it is stock TR6 and pressure plate and contact disc
look fine. Fork is bolted to shaft and is not bent.

 

Do I have an adjustment problem? If I leave slave shaft slightly loose, I
can't shift easily.

 

Can I have the m/c shaft extended too far?

 

Maybe a stiffer spring on pedal to bypass problem for now?

 

I can drive 5 hours tomorrow and get another clutch but don't want to waste
the time since this one looks ok.

 

Thanks

Mike

 

Michael T. Moore, CPA

2007 West 32nd Street

Erie, PA 16508

 

Phone: 814-868-4831  ext 103

Fax:        814-864-7383
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/pvucinic@netspace.net.au