[Fot] TR4 clutch getting desperate, 2 days till racing school

[Bill Tobin]

Mike, give me a call: 398-2908
I'll be up till 11:30.
Bill
----- Original Message ----- 
From: "Mike Moore" <mmoore at wave1.net>
To: "'FOT'" <fot at autox.team.net>
Sent: Sunday, May 12, 2013 8:24 PM
Subject: [Fot] TR4 clutch getting desperate, 2 days till racing school


> At track today, I had to push clutch in 95% of way to be able to shift. If 
> I
> go 100% pedal sticks to floor, but pulls up really easily.
>
>
>
> Problem started after I replaced m/c and s/c. Master is Wilwood (same as 
> was
> in car) slave is stock from Roadster Factory.
>
>
>
> Just took clutch out, it is stock TR6 and pressure plate and contact disc
> look fine. Fork is bolted to shaft and is not bent.
>
>
>
> Do I have an adjustment problem? If I leave slave shaft slightly loose, I
> can't shift easily.
>
>
>
> Can I have the m/c shaft extended too far?
>
>
>
> Maybe a stiffer spring on pedal to bypass problem for now?
>
>
>
> I can drive 5 hours tomorrow and get another clutch but don't want to 
> waste
> the time since this one looks ok.
>
>
>
> Thanks
>
> Mike
>
>
>
> Michael T. Moore, CPA
>
> 2007 West 32nd Street
>
> Erie, PA 16508
>
>
>
> Phone: 814-868-4831  ext 103
>
> Fax:        814-864-7383
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net