[Fot] piston ring question

John Wagner j.wags63 at yahoo.com
Sat May 11 07:19:54 MDT 2013


     Wiseco says: The gap on the second ring should always be larger than the
top ring end gap, this will help to reduce top ring 
flutter or lifting.
That's right off they're installation "pink" sheet.  Maybe some piston
manufacture think different. I would go my what
your piston manufacture says. 
----- Original Message -----
From: Tony Drews <tony at tonydrews.com>
To:
riverside at southslope.net; FOT <fot at autox.team.net>
Cc: 
Sent: Friday, May 10,
2013 7:40 PM
Subject: Re: [Fot] piston ring question

Doesn't sound right to
me.

Tony Drews

At 03:53 PM 5/9/2013, riverside at southslope.net wrote:
>A
local engine builder has recommended that the
>2nd compression ring have a
larger end gap than
>the top ring.   I have not heard of this before and
>cannot figure out any benefit.
>
>Any thoughts from this group?
>
>art de
armond
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/j.wags63@yahoo.com



More information about the Fot mailing list