[Fot] Head Gasket Coating

[Kas Kastner]

Pay attention here. The sticky part matters not much, but the copper wire
literely seals the deal.  Ho Ho Ho.

*Never be beaten by equipment.*


On Sun, Mar 31, 2013 at 6:09 PM, John Wagner <j.wags63 at yahoo.com> wrote:

>      If you are using a shim gasket, may I recommend  GM Goodwrench gasket
> sealing compound.
> We super glue .020 or less soft copper wire in the outer
> rings and with a small sponge paint
> roller apply the gsc. It looks like, an
> has the consistency of Carmel topping. Its Been holding
> High comp. chevys
> together since the 60's.  Good Stuff and not that expensive.
>
>
>      John
> Wagner
>      Just the wrench
> From: Randall <TR3driver at ca.rr.com>
> To:
> Cc:
> fot at autox.team.net
> Sent: Sunday, March 31, 2013 6:36 PM
> Subject: Re: [Fot]
> Head Gasket Coating
>
> FWIW, Hylomar spray is apparently still available, just
> not from Permatex or
> Valco:
> http://goo.gl/jE4dw
> http://goo.gl/mvKDc
>
> --
> Randall
> _______________________________________________
> fot at autox.team.net
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive:
> http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/j.wags63@yahoo.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/kaskastner@gmail.com