[Fot] Head Gasket Coating

[Joe Boruch]

I have never sprayed this particular type of product, so I don't know if it
sprays out like spray paint or undercoating.  If like spray paint, then should
be able to get an even coat.  Joe

---------- Original Message ----------
From: "Barr, Scott" <sbarr at McCarty-Law.com>
To: 'Joe Boruch' <jaboruch at netzero.com>
Cc: 'tom strange' <tomstrange5 at gmail.com>
Subject: RE: [Fot] Head Gasket Coating
Date: Mon, 25 Mar 2013 13:26:26 +0000

Would you be able to apply this evenly enough to seal?

I wonder whether this might be a nice adjunct to a copper gasket where used to
lower the compression ratio or clear piston pop-up, but where the copper
gasket isn't sealing well.

Scott B.

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On Behalf
Of Joe Boruch
Sent: Saturday, March 23, 2013 7:16 PM
To: fot at autox.team.net
Subject: [Fot] Head Gasket Coating

I have been debating the merits of coating a steel shim head gasket with a
Fluoroelastomer (Viton) coating.  Cometic gaskets are Viton coated.  There are
Fluoroelastomer coatings available in aerosol cans.  Have any of you tried
anything like this?   Joe(B)
____________________________________________________________
OVERSTOCK ipads: $30.93
Get 32GB Apple iPad for as low as $30.93. Limit 1.Day. Grab yours Now!
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/sbarr@mccarty-law.com
____________________________________________________________
How to Sleep Like a Rock
Obey this one natural trick to fall asleep and stay asleep all night.