[Fot] cooling

[Joe Boruch]

I have a -4 braided hose from the heater valve location in the head to the
thermostat housing by-pass location.  The fitting at the back of the head has
the ID reduced to about 3/16 inch.  This is essentially a steam vent.  Joe(B)

---------- Original Message ----------
From: John Wagner <j.wags63 at yahoo.com>
To: "Fot at autox.team.net" <Fot at autox.team.net>
Subject: [Fot] cooling
Date: Mon, 18 Mar 2013 12:26:40 -0700 (PDT)

     Amici

     I am thinking of running a tube from the heater outlet to the
front of the engine.
In past threads it said to connect it to the water pump
inlet (heater return) that is just
taking hot water  and returning it to the
engine, wouldn't it be better to plumb it to
the thermostat housing and on to
the radiator?


 Thank you
 Just the wrench
 John Wagner
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jaboruch@netzero.net

____________________________________________________________
OVERSTOCK ipads: $30.93
Get 32GB Apple iPad for as low as $30.93. Limit 1.Day. Grab yours Now!
http://thirdpartyoffers.netzero.net/TGL3231/51478a9a9ec6a99547dst01duc