[Fot] How likely is cracking a trailing arm on a TR6?

[toodamnfunky at comcast.net]

The trailing arms are pretty tough. The only place I could even imagine them
cracking would be at the spring

seat area but even there it would take some sort of casting defect. I wouldn't
sweat it.

jim g



----- Original Message -----


From: "sherry robyn" <sherryjimmy6116 at att.net>
To: fot at autox.team.net
Sent: Wednesday, June 19, 2013 3:12:19 PM
Subject: [Fot] How likely is cracking a trailing arm on a TR6?

I have regular height stiffer springs, rear sway bar, stock soft bushings in
trailing arm and diff (with cups on diff mounts), frame strengthening in
certain areas, and red Konis (soft bushings) with the conversion tied into the
roll cage. B I currently have the Konis set on the second to the stiffest
setting. B I backed off the stiffest setting for the Konis due to talk of the
trailing arm cracking. B I am just wondering if I can go to the stiffest
setting on the Konis without much worry. B Any thoughts would be appreciated.
Thanks, Jim
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/toodamnfunky@comcast.net