[Fot] TR4 deck height

[Joe Boruch]

It was more than just an impression in the carbon.  It was an impression in
the aluminum.  Joe(B)


From: Kas Kastner <kaskas at cox.net>
To: <jaboruch at netzero.net>, "toodamnfunky at comcast.net"
<toodamnfunky at comcast.net>
Cc: fot <fot at autox.team.net>
Subject: RE: [Fot] TR4 deck height
Date: Wed, 23 Jan 2013 02:32:53 +0000

Impression in the carbon is just right.

Never be beaten by equipment

> From: jaboruch at netzero.net
> Date: Wed, 23 Jan 2013 00:38:35 +0000
> To: toodamnfunky at comcast.net
> CC: fot at autox.team.net
> Subject: Re: [Fot] TR4 deck height
>
> With a billet crank and Pauter rods I use a 0.010 inch deck height, plus
allow
> 0.022 for the head gasket. I have run as little as 0.007 deck, but had
> impressions of the head on top of the pistons. Joe(B)
>
____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...