[Fot] Pushrod tube leaks oil

[Joe Alexander]

I used a Craftsman socket with a small end that steps down. It worked great as
a swaging tool.

Multiple light taps to move material.

Of course you can only do the top.

I am sure some will also say to use carb cleaner at the tubes and add some
sealant of some kind.





Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com





-----Original Message-----
From: Ken Suhre <kenandtweety at yahoo.com>
To: FOT <fot at autox.team.net>
Sent: Sun, Jan 27, 2013 8:18 pm
Subject: [Fot] Pushrod tube leaks oil


I have searched the Archives for a solution to this problem my TR4. Has anyone
fixed this problem without pulling the head? I would like to stop the leak
either with the head on the engine or as a last resort pulling the head.
Ken Suhre
1969 TR4 #79
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/n197tr4@cs.com