[Fot] TR4 deck height

[Joe Boruch]

With a billet crank and Pauter rods I use a 0.010 inch deck height, plus allow
0.022 for the head gasket.  I have run as little as 0.007 deck, but had
impressions of the head on top of the pistons.  Joe(B)

---------- Original Message ----------
From: "Jim Gray" <toodamnfunky at comcast.net>
To: "'FoT Triumph'" <fot at autox.team.net>
Subject: [Fot] TR4 deck height
Date: Tue, 15 Jan 2013 18:27:14 -0700

Greetings FoT,

I was curious as to what the group likes to run for deck height or piston to
head clearance

assuming forged rods and stock crank are used.

I have heard everywhere from zero to .040

Thanks as always,

jim g
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/jaboruch@netzero.net

____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...