[Fot] 1147cc Spit manifold gaskets

[robertten1 at aol.com]

I'd look for a Payen Head Set for Spit Mk1/Herald 1200.  Though I'm Not sure
if you are looking for the carb gaskets or the metal sandwich intake-manifold
Head Gasket.  I might have some of the Carb Gaskets in my spares.

Good Luck,
Bob T
'63 Spit Mk1 ( street )
'64 Spit GT ( autocrosser )



-----Original Message-----
From: robert bownes <bownes at seiri.com>
To: Robert MacKenzie <list at mackenzie.aero>
Cc: fot <fot at autox.team.net>
Sent: Sun, Jan 13, 2013 4:30 pm
Subject: Re: [Fot] 1147cc Spit manifold gaskets


I found one at, believe it or not, NAPA. That was about 10 years ago though.
On Sun, Jan 13, 2013 at 4:12 PM, Robert MacKenzie <list at mackenzie.aero>wrote:
> Does anybody have a source for good intake/exhaust manifold gaskets for the
 1147cc Spitfire engine?  I can get the $3 paper ones but am looking for a
 better quality gasket.

 I need one urgently.

 Robert MacKenzie
 NASS # 511
 Austin Texas
 '78 1500 (street)
 '71 GT6 MKIII (project)
 '62 Spitfire 4 (race)
 _______________________________________________
 fot at autox.team.net

 http://www.fot-racing.com

 Donate: http://www.team.net/donate.html
 Archive: http://www.team.net/archive
 Forums: http://www.team.net/forums
 Unsubscribe: http://autox.team.net/mailman/options/fot/bownes@web9.com
______________________________________________
ot at autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe: http://autox.team.net/mailman/options/fot/robertten1@aol.com