[Fot] TR chasssis stuff

[Bill Tobin]

Hi Gang, I put Ted's kit in my TR6 last summer; piece of cake.
I'm going to take a close look around my front suspension and rack mounts 
when the engine is out (tomorrow). It's lots easier to do repairs with an 
empty engine bay.
Cheers, Bill
----- Original Message ----- 
From: "Ted Schumacher" <tedtsimx at bright.net>
To: <fot at autox.team.net>
Sent: Sunday, January 13, 2013 3:18 PM
Subject: [Fot] TR chasssis stuff


> With all the discussion about chassis strengths, or lack thereof, wanted 
> to let the list know about our TR6 chassis/diff stiffener kit. This was 
> developed by Lanky Foushee for the Group44 TR6. When we redid my 
> daughter'sTR6 chassis at the Group44shop, we put this on the car and 
> developed a "kit". The kit boxes the 3 sided support that holds the upper 
> spring mount/body tub cross bar. it also supports the outer end of the bar 
> that is the top spring seat. And, boxes in the rear cross member where the 
> shocks are attached.  By boxing in these points, the diff supports now 
> becomes part of the chassis. Less load and better rigidity. Kit can be 
> installed with body on frame. Pictures are on our website - 
> www.tsimportedautomotive.com. Click "Performance Parts" then select 
> TR250/TR6 Performance Parts then go to the suspension section. Thanks for 
> your time. Ted
>
> -- 
> Ted Schumacher
> tedtsimx at bright.net
> http://www.tsimportedautomotive.com
> 108 S. Jefferson St.
> Pandora, Ohio, USA 45877
> Fax: 419.384.3272 (24 Hrs.)
> Phone: 800.543.6648 (US & Canada)
> Tech/ Gen. Information/ Worldwide: 419.384.3022
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: 
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net