[Fot] Pawn Shopping

Joe Alexander n197tr4 at cs.com
Fri Jan 11 18:40:29 MST 2013


yes




Joe Alexander
A. R. E.
645 1st Street
Jesup, Iowa 50648
319.464.4711  (cell)
n197tr4 at cs.com





-----Original Message-----
From: Bobby Whitehead <igofaster at att.net>
To: John Hasty <jhhasty at gdhs.com>
Cc: FoT Triumph <fot at autox.team.net>
Sent: Fri, Jan 11, 2013 7:31 pm
Subject: Re: [Fot] Pawn Shopping


did I miss something?




________________________________
From: John Hasty <jhhasty at gdhs.com>
To: Bobby Whitehead <igofaster at att.net>
Cc: Duncan Charlton <duncan.charlton54 at gmail.com>; FoT Triumph
<fot at autox.team.net>
Sent: Fri, January 11, 2013 7:24:33 PM
Subject: Re: [Fot] Pawn Shopping

Gee whiz, Bobby, having collected tools since my "hot rod" days in the late
40's

& 50's, I couldn't possibly tell you all the brands.  For sure Sears was a big
source,  but I'm sure none of them had "dick" in the name


Sent from my iPhone

On Jan 11, 2013, at 8:09 PM, Bobby Whitehead <igofaster at att.net> wrote:

> if you have a pawn shop in your travels, go in every once in a while if
you're


> curious...
>
> every one is different..  there are good deals to be found across the board,
> hence my toolsandjewels name   .... new web page is    www.unclejoespawn.com

>
>
>
> yes I'm self serving if you're in Weatherford Texas you get the DEAL...
>
> no I'm not Uncle Joe
>
> Bobby Whitehead
> Pawn Star of CVAR
>
>
>
> ________________________________
> From: Duncan Charlton <duncan.charlton54 at gmail.com>
> To: FOT <fot at autox.team.net>
> Sent: Fri, January 11, 2013 2:36:14 PM
> Subject: Re: [Fot] Harbor Freight
>
> Don't forget pawn shop tools.  About ten years ago I found the size
> specifications for Whitworth wrenches, so I bought 8 or 10 reasonably good
> quality open end wrenches from a pawn shop and ground them to size.
>
> Duncan
> (Texas)
> 1952 Morgan Plus 4
> Red #6
>
>
> On Jan 11, 2013, at 6:06 AM, Bob Kramer wrote:
>
>> Cheap tools are great for making "special tools". I needed a very narrow
> open
>> end large wrench for TR6 hubs and a HF crescent was the best option once I
>> ground it down.
>>
>> Sent from my iPhone
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/igofaster@att.net
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/jhhasty@gdhs.com
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/n197tr4@cs.com



More information about the Fot mailing list