[Fot] aftermarket crank dampeners and pullies for TR4's

[Dennis DeLap]

And on a related note - does anyone have a narrow belt alloy water pump pulley
to sell?
Thanks
Dennis

-----Original Message-----
From: "BillDentin at aol.com" <BillDentin at aol.com>
Sent: b12/b3/b2013 12:50 PM
To: "tony at tonydrews.com" <tony at tonydrews.com>; "atr6racer at hotmail.com"
<atr6racer at hotmail.com>; "toodamnfunky at comcast.net"
<toodamnfunky at comcast.net>
Cc: "fot at autox.team.net" <fot at autox.team.net>
Subject: Re: [Fot] aftermarket crank dampeners and pullies for TR4's

In a message dated 12/03/2013 12:42:39 PM Central Standard Time,
tony at tonydrews.com writes:


> Who is the source for the ATI dampers?  I switched to the Moss style
> one a year ago after an older model (different design) came apart.
>

I am not sure whose harmonic damper it is, but I believe we got ours from
Ken Gillanders (British Frame & Engine) many, many years ago.  I assume it
came from the UK.  We've never had any issues.

Seems like I recall this tread on the FOT list quite a few years ago, and
didn't some folks feel that that harmonics was a much bigger issue on the six
cylinder engines, and not critical on the fours.

Bill Dentinger


Bill Dentinger
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/yellow-green@sbcglobal.net