[Fot] Electric connections

[Tony Drews]

I solder anything I can.  I usually run some heat shrink tubing over 
the joint between the connector and the wire after soldering.  I make 
an effort to minimize the number of connections / connectors 
too.  Every connection is a possible point of failure.

Tony Drews

At 02:13 PM 8/7/2013, Christopher Bock wrote:
>Amici
>
>What is the best practice for electric connections, crimp or solder?
>
>Chris
>_______________________________________________
>fot at autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com