[Fot] Oil collecting on TR6 valve cover

[sherry robyn]

Hi Bud,

I finally got around to rounding up some of these for my TR6s.  I
called a Honda 
parts dept. and they say that this is not a good number for
them.  Do you have 
any other particulars such as a Honda model that uses
them, etc?  They also say 
they need to order them so I can't just measure
them in the bin.  


Thanks, Jim




________________________________
From:
Bud Rolofson <levilevi at comcast.net>
To: Mark J Bradakis <mark at bradakis.com>
Cc: fot at autox.team.net
Sent: Sat, June 30, 2012 12:06:23 PM
Subject: Re: [Fot]
Oil collecting on TR6 valve cover

That Honda Part # is 90541-371-000.  I've
had great luck stopping leaks out the 
cover bolt holes with these.


Bud
Rolofson

71TR6 CC57365 (Good 6)
66TR4A CTC57806 (The Wreck-Almost parts)
66TR4A CTC57529 (The Project)
71F-250 Camper Special (Triumph Support Vehicle)
Z-50A Hardly Davidson 1977 Honda Mini-Trail Bike (Triumph Pit Bike)
levilevi at comcast.net




On Jun 26, 2012, at 2:13 PM, Mark J Bradakis wrote:
> There is a Honda Goldwing valve cover seal that is a perfect fit for the
>
stock TR valve covers, I know I have the part number written down
>
somewhere.  I am fairly certain that Ted S. also sells them.  This is one
>
area where too many people think that if a little is good, more is better.
>
I've seen a LOT of distorted valve covers due to overtightening.
> 
> mjb.
>
_______________________________________________
> fot at autox.team.net
> 
>
http://www.fot-racing.com
> 
> Donate: http://www.team.net/donate.html
>
Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
Unsubscribe: http://autox.team.net/mailman/options/fot/levilevi@comcast.net
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive:
http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/sherryjimmy6116@att.net