[Fot] Steering shaft u-joint TR-4

[Bill Babcock]

With good reason. Nothing like having those rag joints come apart--say when
you're doing 100 plus and aiming straight at some ARMCO barriers in the front
straight at Sears Point.

The shaft size for TRs is pretty small too.

On Oct 14, 2012, at 9:25 PM, Mike Mehl <mike.mehl at yahoo.com> wrote:

> Tony
> Look at Pegasus part number 1492-32.  I put those on my car.   I was worried
about the rubber ones.
> Mike
>
> Sent from my Kindle Fire
>
>
>
> _____________________________________________
> From: Tony Drews <tony at tonydrews.com>
> Sent: Sun Oct 14 18:53:25 PDT 2012
> To: fot at autox.team.net
> Subject: [Fot] Steering shaft u-joint TR-4
>
>
> My steering shaft has two u-joints in it. The lower one is a big
> beefy cast thing that I bought from Moss to replace the big beefy
> cast thing that was there before. The upper one isn't quite as heavy
> duty looking but does a much better job of actually clamping onto the
> shaft. I've tightened the sh** out of the lower big beefy one and
> it's still not as tightly clamped as I'd like.
>
> So... Where can I buy alternate u-joints for the TR-4 steering shaft?
>
> Look forward to the advice.
>
> Tony Drews
>
> PS - article on front suspension swap to TR-6 stuff is still coming.
> _____________________________________________
>
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/mike.mehl@yahoo.com
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com