[Fot] Steering shaft u-joint TR-4

[Bill Babcock]

Don't. Switch the whole thing over to Borgeson stuff. IMHO that's another
thing I wouldn't leave in the hands of designers who have been dead for 40
years.

On Oct 14, 2012, at 6:53 PM, Tony Drews <tony at tonydrews.com> wrote:

> My steering shaft has two u-joints in it.  The lower one is a big beefy cast
thing that I bought from Moss to replace the big beefy cast thing that was
there before.  The upper one isn't quite as heavy duty looking but does a much
better job of actually clamping onto the shaft.  I've tightened the sh** out
of the lower big beefy one and it's still not as tightly clamped as I'd like.
>
> So...  Where can I buy alternate u-joints for the TR-4 steering shaft?
>
> Look forward to the advice.
>
> Tony Drews
>
> PS - article on front suspension swap to TR-6 stuff is still coming.
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe: http://autox.team.net/mailman/options/fot/billb@bnj.com