[Fot] slave cylinder replies

[EDWARD BARNARD]

I could be mistaken but I believe there is also a difference in the overall length of the cylinder, which requires it to be mounted on the opposite side of the mounting bracket.
JMTC
-Ed-

--- On Thu, 11/22/12, davehogye <dlhogye at comcast.net> wrote:


From: davehogye <dlhogye at comcast.net>
Subject: [Fot] slave cylinder replies
To: Fot at autox.team.net
Date: Thursday, November 22, 2012, 12:52 PM


FoT, I guess that I should share what I've learned about TR slave cylinders. 
It seams that either TR4A or TR6 slave cylinder will work. Attention needs to be paid to the push rod length, an adjustable rod is available and I've been informed that the TR6 slave has an internal return spring compared to the external spring on the earlier units. Later TR3s through TR4A use the same slave. 
Thanks again, 
Dave 
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/edwardbarnard@prodigy.net