[Fot] J-tpe OD enhancements for racing

[riverside at southslope.net]

Will replacing the TR spring with an AH 3000 spring
get more pressure without the need for shims?

art de armond

-----Original Message----- 
From: Randall
Sent: Friday, November 09, 2012 6:54 PM
To: 'Friends'
Subject: Re: [Fot] J-tpe OD enhancements for racing

> Care must be taken to not shim the spring too much as the spring will not
> allow the piston to clear the relief hole at the end of the travel. The
> result
> is disaster! Don't ask how I know.

You too, huh?  Just to expand a bit, make sure there is enough travel before
coil bind to fully uncover the relief hole (or holes).  The pressure was
fine on the bench ...

Randall
_______________________________________________
fot at autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/fot/riverside@southslope.net





-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.2221 / Virus Database: 2441/5384 - Release Date: 11/09/12